Bale Tie Selector
Enter your bale size and weight — the numbers you already have and we'll spec the right gauge and cut length to order.
1
Baler Orientation
2
Bale Dimensions
All three sides. The two wrap sides set the cut length; the full size sets the bale density.
in
in
in
3
Bale Weight
A typical finished bale. Most balers print this, or use your average mill ticket weight.
lbs
4
Ties Per Bale
Ties
5 ties
Recommended Bale Tie
Gauge
14 GA
standard hold
Cut Length
14′
stocked length
Order As14 GA × 14′
Request a Quote for This →
Assumes baled OCC (cardboard). Recommendation only — confirm for your material and conditions.
How it works: Cut length wraps the two bale sides plus a knot allowance, rounded up to the next foot Parade stocks for that gauge. Gauge is set by how tightly the bale is packed (its density) together with its overall weight — whichever calls for the stronger wire. Light bales tie off with 14 gauge; firmer or heavier bales step up through 13 and 12 gauge; and the heaviest bales, like big horizontal auto-tie bales, call for 11 gauge. The result is the everyday recommendation; step up one gauge for hard handling, long hauls, or heavy stacking. Questions? Call Parade at 215-537-9473.
Please note: This tool assumes a baled OCC (old corrugated cardboard) load. Other materials behave differently and may require a different gauge. All results are a recommendation only — final wire selection is the operator's responsibility and should be confirmed for your specific baler, material, and handling conditions.
Please note: This tool assumes a baled OCC (old corrugated cardboard) load. Other materials behave differently and may require a different gauge. All results are a recommendation only — final wire selection is the operator's responsibility and should be confirmed for your specific baler, material, and handling conditions.